Tech Data

Aesthetics

The profiles may be fixed, horizontally, vertically or even diagonally. Laying the cladding profile horizontally also allows the opportunity of including horizontally mitred corners or curved profile corners dependent upon choice and radius.Often the feature of a hidden gutter contained above the eaves will allow a transfer from roof to cladding profile incorporating a curved eave. The wider crest of the cladding profile certainly enhances the curved eaves feature. In this, or in parapet wall situations the curved effect can  be continued on the corners of the structure by the inclusion of curved mitred corners. These mitred corners may be manufactured at any angle to suit the structure.

Elite Systems 51,52,53,55,56,58 & 60 have LPCB Approval

Profile Swages

A additional profile swage is available on a range of our wall profiles, availability is indicated by the addition of an 'S' suffix to the standard profile description. The profile swage (shown on the left) is added purely for aesthetic reasons.

CE Mark

We have recently been accredited with CE Marking to BS EN 14782 for its roofing profiles manufactured from Corus Colorcoat® pre-finishedsteel, conforming to the most respected European product standard. For more information visit http://euroclad.net/cemark/

Please be aware that the combination of dark colours, a highly reflective coating, such as Colorcoat Prisma, and the horizontal orientation of cladding profiles can lead to variations in the surface appearance of installed walls which may be considered unsightly or less than perfect.  This can be the case even when the product and installation is faultless. Variations in ambient lighting and viewing angles can exacerbate this effect.  Please note that where cladding is applied horizontally in dark colours using highly reflective materials Euroclad cannot be held accountable for perceived defects.