Factory Manufacture & Delivery

Euroclad standing seam profiles are manufactured at our Cardiff based manufacturing plant and packed carefully for delivery. ISO9002 Quality checks throught the material order process then the manufacturing process enable complete material and product traceability through and after the production process.

Packaging

Straight packed profiles enable good use of the trailer space and an average load of sheets will contain approx 2500m2 of sheets. Pre curved sheets are stacked on the delivery trailer in a differents method only allowing 800m2 per load. Maximum pack weights for delivered sheets is 1 tonne. Sheet lengths up to 8 metres can be safely lifted using webbing slings more than 8 metres will require additional use of a spreader beam (we can supply by request). Spreader beams are designed for crane offload only.

Site Manufacture - Ground Roll option

 

Where sheet length exceeds 18.5 metre lengths we recommend the use of our mobile production units, where standingseam profiles can also be produced from one of our 3 mobile units. An 85 KVA, 3 phase generator supplies power to the Rollformer for upto 2 weeks without refueling so we have no additional requirement on site except for the necessary space and correct number of contractor supplied manpower. The Euroclad On Site team can arrive to site and produce sheets following a 10 minute simple trailer setup. Sheets can be rollformed then lifted using a Euroclad Spreader beam or alternatively the rollformer can be safely lifted to the eaves and sheets produced at roof level.

Roll at Eaves Option

 

The rollformer has its own wireless remote control unit so the machine can be run from the safety of the roof area without being inside the rollformer production unit. When rolling at ground level we can produce 6000lm of sheets per day, at roof level we can also produce 6000lm per day.

Curving Option

The curver facility can also be located on site, it is contained inside a 20ft container and can produce single, multi and waveform curves on site down to a 1.5 metre radius. (MINIMUM RADII - DEPENDING ON MATERIAL SPECIFICATION)

Images - click for larger image

 

Which option is best for me?

In all cases of site production we require close consultation throughout the quotation process and advise that it continues through planning stages whenever appropriate for size of the project. We will attend necessary site planning meetings to discuss our Method Statement and personnel requirements and be able to give precise site specific method statements. We have a vast knowledge of building site situations and our full time On site team will advice the best, most appropriate site solution to receive our standing seam sheets, whether straight, curved, multi curve or waveform on to site. To help decide which is your best method of supply to site please contact our sales office on 0044(0)2920 790 722

Addional Terms and conditions apply to site produced product - click here for more information