Gauge of Material

The standard industry gauge for liner sheets is 0.4mm, however, both 0.5mm and 0.7mm gauges are also available. Should there be a requirement for the heavier gauges, the Euroclad Sales Office should be contacted to advise upon availability. The Euroclad liner sheets have been designed to span up to 2,000mm in 0.4mm gauge material. It should be noted that certain designs of liner, offered by other manufacturers, which incorporate large flat areas between pitches, have gapped significantly between purlins. As a result of such experiences, there has been a tendency for architects to specify 0.7mm.
Liner profiles are available with crimped curves, parameters are listed here - Euroclad Roof Profiles Product Parameters

Profile Swages

A additional profile swage is available on a range of our liner profiles, availability is indicated by the addition of an 'S' suffix to the standard profile description. The profile swage (shown on the left) is added purely for aesthetic reasons.

CE Mark

We have recently been accredited with CE Marking to BS EN 14782 for its roofing profiles manufactured from Corus Colorcoat® pre-finished steel, conforming to the most respected European product standard. For more information visit http://euroclad.net/cemark/

Profiled Liner Technical Data

Euroclad 19/1000 : Liner Profile (19_2L) - Longest sheet available 6.5m

Standard Liner Profile Drawing - 19_2L |  19_2_LS with swages | OPTIONAL Profile Variations 19_3D | 19_3DS

Weight per linear metre

Steel Liner - 0.4mmm - 3.49kg/m² | 0.5mm - 4.372kg/m² | 0.7mm - 6.121kg/m²
This profile can self curve to a radius of 35 metres.

 

Euroclad 20/914 : Liner Profile (20_914_L) - Longest sheet available 7m

Standard Liner Profile Drawing - 20_914L

Weight per linear metre

Steel Liner - 0.4mmm - 3.518kg/m²
This profile can self curve to a radius of 35 metres.

Euroclad 20/1066 : Liner Profile (20_1066_1L) - Longest sheet available 7m

Standard Profile Drawing - 20_1066_1L

Weight per linear metre

Steel Liner - 0.4mmm - 3.531kg/m² | 0.5mm - 4.525kg/m² | 0.7mm - 6.334kg/m²
This profile can self curve to a radius of 35 metres.

 

 

Euroclad 32/1000 : Liner Profile (32_3_L) - Longest sheet available 14m

Standard Profile Drawing - 32_3L | OPTIONAL Profile Variation 32_4D

Weight per linear metre
Steel Liner - 0.5mmm - 4.832kg/m² | 0.7mm - 6.753kg/m² | 0.9mm - 6.862kg/m²
(lengths over 12m/ Extra Costs apply)
This profile can self curve to a radius of 40 metres.

Euroclad 38/914 : Liner Profile (38_3D) - Longest sheet available 14m

Standard Profile Drawing - 38_3D

Weight per linear metre
Steel Liner - 0.5mmm - 5.277kg/m² | 0.7mm - 7.388kg/m² | 0.9mm - 9.499kg/m²
(lengths over 12m/ Extra Costs apply)
This profile can self curve to a radius of 45 metres.

Euroclad MW5 : Liner Profile (MW5_2L) - Longest sheet available 14m

Standard Profile Drawing - MW5_2L | OPTIONAL Profile Variations MW5_2LS | MW5_3DS

Weight per linear metre
Steel Liner - 0.5mmm - 4.832kg/m² | 0.7mm - 6.753kg/m² | 0.9mm - 6.862kg/m²
(lengths over 12m/ Extra Costs apply)
This profile can self curve to a radius of 40 metres.